Welcome to Final Inspection Australia!
Shopping Cart - $0.00

You have no items in your shopping cart.

Return to Previous Page

The Eraser™ 125mm Ø

The Eraser™ 125mm Ø

Be the first to review this product

$25.00

Quick Overview:




The Eraser™ clay/decontamination tool 125mm Ø
Significantly higher rate of contamination removal, faster and easier than a clay bar.
For random orbital machine use.

Details

The Eraser™ clay/decontamination tool revolutionises the way detailers decontaminate surfaces and will soon mark the end of cumbersome and time consuming clay bar treatment.

The Eraser™ uses polymers to pull away surface contaminants without aggressive mechanical action.
The repetitious movement of claying a car severely reduces efficiency as it fatigues the detailer.
The Eraser™ solves this issue by utilising a machine to carry out all the leg work.
The Eraser™ also reduces marring significantly and provides a significantly higher rate of contamination removal.

The Eraser™ is designed for random orbital machine use, but may be used by hand.

 

Directions of use
For best results;

1. Only use the Eraser™ on a clean, dry vehicle and only work one panel at a time.

2. Lubricate panel with Final Inspection Clay Lube™

3. Work the Eraser™ at a speed of approximately 5ooo opm moving the machine slowly to ensure thorough cleaning.

4. Remove lubricant immediately after panel has been decontaminated.

 

Surface decontamination with The Eraser™ (mechanical decontamination) should always be followed by a sub-surface (chemical) decontamination. We highly recommended following The Eraser™ with a wipe down utilising Cleanse STRONG™ for thorough two-stage mechanical and chemical decontamination.

 

Maintenance & FAQ
For best results, keep the Eraser™ clean, and free of dust.  Clean it with lubricant before the next use by spraying lubricant onto the pad and removing the lubricant (along with any dust) by wiping the face with a paintwork cloth.

Use the Eraser™ on a section of glass first before using it on paintwork to clean and soften the face.

If your Eraser™ is marking paintwork, it is highly likely that it is contaminated and requires cleaning or replacement, this is why clean storage is important, treat your Eraser™ like you would a clay bar in terms of storage.

If your Eraser™ is slow to remove contaminants, it may require replacement.  The Eraser™ will decontaminate 5 vehicles before performance drops but will decontaminate 20-30 vehicles before performance deteriorates significantly.

Additional Information

Video

Write Your Own Review

Only registered users can write reviews. Please, log in or register

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.



Since 1997, Final Inspection has provided products and services to enhance and maintain vehicle image and condition.

Companies such as BMW Group and Mercedes-Benz have relied upon industry solutions by Final Inspection, high quality products and services to maintain vehicles in concours condition at events and to present launch vehicles for reveal.  They rely on final inspection to 'polish their image' and now, so can you.

With the world’s highest quality  range of super-hydrophobic paint protection, high lubricity, low SLS shampoo and inventions such as the ExxtenderTM, you have found the supplier with the solutions.