Directions of use:USE IN A WELL VENTILATED AREA, do not use Purity in a cabin with closed doors. Spray 4-6 pumps of Purity onto a clean (not used for any other purpose or with any chemical) NanoFibre Interior Cloth and wipe surfaces leaving them wet for at least 30 seconds. Remove purity from the surface with either the dry side of the cloth or a separate clean, dry NanoFibre Interior Cloth.
IMPORTANT:Surfaces must remain wet for 30 seconds for Purity to work. If surfaces do not stay wet for more than 30 seconds, add more Purity to cloth and repeat. For hard surface and transparent plastics, if streaking remains, re apply a very small amount of product to dry cloth and remove immediately (no wetting time) for a streak free finish. For higher gloss on wood trim and other high gloss surfaces, we recommend applying a very small amount of Gloss Boost. Version 1 l Optimised 2o12 ℮5ooml l 16.91 fl. oz. Purity is a colourless, almost odourless liquid. Purity is 100% Australian Made.
Since 1997, Final Inspection has provided products and services to enhance and maintain vehicle image and condition.
Companies such as BMW Group and Mercedes-Benz have relied upon industry solutions by Final Inspection, high quality products and services to maintain vehicles in concours condition at events and to present launch vehicles for reveal. They rely on final inspection to 'polish their image' and now, so can you.
With the world’s highest quality range of super-hydrophobic paint protection, high lubricity, low SLS shampoo and inventions such as the ExxtenderTM, you have found the supplier with the solutions.